Water Pump Hose Outlet 6" 50M

Frequently Asked Questions (FAQs)

1. Can this 6" hose be used on the intake (suction) side of the pump?

• No. You must never use a lay-flat hose on the suction side.
• The vacuum created by the pump intake will instantly collapse the hose and choke off water flow.
• Always use a rigid, corrugated, or wire-reinforced suction hose for the pump inlet. 

2. What types of fittings are best for a 6" 50M hose?

• Camlock fittings (quick-disconnect couplers) are highly recommended for fast setups.
• Pin-lug shank couplings work well for semi-permanent or lower-frequency connections.
• Ensure you use heavy-duty T-bolt clamps rather than standard worm-gear clamps to prevent the fittings from blowing off under pressure. 

3. How do I calculate the weight of a 50-meter hose?

• A standard 50-foot (15-meter) section of 6" PVC lay-flat hose weighs roughly 52 lbs (23.5 kg) empty.
• A full 50-meter roll weighs approximately 170 lbs (77 kg) without fittings.
• When completely filled with water, a 50-meter stretch holds about 900 liters (238 gallons) of water, adding an extra 2,000 lbs (900 kg) of weight. 

4. Can I drive vehicles over the hose while it is operating?

• No, driving directly over a pressurized PVC lay-flat hose can cause it to burst instantly.
• The sudden pressure spike from a tire can rupture the inner polyester reinforcement.
• Always utilize a dedicated rubber hose ramp or dig a shallow trench if vehicles must cross its path.

5. Is a 6" PVC discharge hose safe for drinking water?

• No. Standard blue or red PVC lay-flat hoses are explicitly rated for non-potable water transfer only.
• They contain chemical plasticizers that can leach into fluid.
• For drinking water, search specifically for an NSF/ANSI 61 certified polyurethane (TPU) lay-flat hose. 

6. How should I clean and store the hose after use?

• Drain completely: Lay the hose on a slight incline to let all remaining water run out.
• Clean off debris: Wash off mud, mildew, and dirt with fresh water to preserve the outer PVC shell.
• Dry thoroughly: Never roll up a wet hose, as trapped moisture promotes mold and degrades the material.
• Store away from sunlight: Keep the rolled hose in a cool, dark shed or container, because prolonged UV exposure makes PVC brittle over time.